Water Proof Fiber Optic Distribution Box Wall Mounted Or Pole
The equipment is used as a termination point for the feeder cable
to connect with drop cable in FTTx communication network system.
The fiber splicing, splitting, distribution can be done in this
box, and meanwhile it provides solid protection and management for
the FTTx network building.
1. Total enclosed structure.
2. Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging,
protection level up to IP65.
3. Clamping for feeder cable and drop cable, fiber splicing,
fixation, storage, distribution...etc all in one.
4. Cable,pigtails,patch cords are running through own path without
disturbing each other, cassette type SC adaptor installation, easy
5. Distribution panel can be flipped up, feeder cable can be placed
in a cup-joint way, easy for maintenance and installation.
6. Cabinet can be installed by the way of wall-mounted or
poled-mounted, suitable for both indoor and outdoor uses.
1. Environmental requirement
2. Main technical datasheet
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:＞1000 times
3. Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation
resistance is less than 2*10^4MΩ/500V(DC)；IR≥2*10^4MΩ/500V
The withstand voltage between grounding device and cabinet is no
less than 3000V(DC)/min, no puncture,no flashover；U≥3000V
Table 1 Model and configuration
|Model||Description||Size(Pic 1)||Max Capacity||Installation Size(Pic 2)||Cable ways|
|CXSJ-020A||Distribution Box||250*190*72||8||16||16(LC)||130*82||Not cup-joint|
|CXSJ-020B||Distribution Box||250*190*72||12||24||16(LC)||130*82||Not cup-joint|
|CXSJ-021A||Distribution Box||293*219*84||16||32||32(LC)||155*82||Not cup-joint / cup-joint|
Product cable ways:
1.Lid；2.Lock coat；3.Lock；4.Seal gasket；5.Splicing flap
plate；6.Adaptor holder；7.Adaptor；8.Lid lock joint bracket；9.Lid
lock clip；10.Base；11. Cable strengthen mound layer；12.
Joint(Option)；13.Lock panel；14.PLC mounting position；15. hot tube
1. Wall-mounted installation
Drill 4 holes over the wall based on the size in table 1,place the
expansion bolt Φ7.5*40,place the box to match up the holes and use
bolt to fasten;
2. Pole-mounted installation
Fix 1 set of the easy pole ring to the telecom pole
1. Users' Manual*1.
3. Accessories Bag * 1
5. Easy pole ring*2,M6*20mm Bolt*2(Option)