0.5MW - 20MW Small Pelton Hydro Turbine / Pelton Water Turbine with
0Cr13Ni4Mo Stainless Steel Runner
1. Water head: 80m - 1000m
2. Power: 0.5MW -- 20MW
3. Frequency: 50/ 60hz
4. Runner Material: Stainless steel 0Cr13Ni4Mo (Samilar to CA6NM)
If you are interest in the Pelton turbine, you should send some key
parameters (such as net head, flow discharge, unit number,
frequency, voltage) in inquiry.
We can offer pelton turbine generator above 500KW, supply the
runner with Forge and CNC machine, or runner with cast abrading
machine for your require.
The Pelton turbine is widely used in hydropower station with the
heads from 80-1600m.
Pelton turbine is consisted of runner, turbine case, nozzles
assembly, inlet pipe, deflector etc. The runner is assembled in the
shaft of the generator, torque transmission by ping.
lt utilizes the dynamic power of high pressure water flow to rotate
the runner and force the rotor work, The centre line of the jet is
in the same plane as the runner while rotating.
Pelton turbine has the advantages of compact construction, stable
running and easy operation. Normally, Small pelton turbine always
arranged with horizontal shaft and one or two nozzles, Medium size
and larger Pelton turbines are most often arranged with vertical
shaft, and equip four or six nozzles to obtain more power.
Horizontal pelton turbine with one /two nozzles
Vertical pelton turbine with four nozzles
From 80m to 1000m.
From 500KW to 20000KW
Stainless steel (0Cr13Ni4Mo)
Cast machine/Forge + CNC machine
Governor, Inlet Valve, unit side panel, excitation system
HYDROTU is the complete Chinese hydropower equipment supply,
consulting and engineering design venture in the field of
hydropower equipment. We provide the high quality Chinese
hydropower equipment with advanced technologies and integrated
services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with
customized support from project planning through implementation to
plant commissioning and service. Our principle: Customer’s project
is our project , customer’s success is our success.
HYDROTU covers the services, complete equipment supply, economic
solution of the global hydropower projects and aims to be the best
global supplier of hydropower equipment as well as the best
integrated services provider on the hydropower markets.
Hydrotu Pelton runner with Forged integrally + Entire CNC machning has
already achieved the ace level in the world since the accumulation
of the high head runner experience in decades.
the pelton runner adopt integrally forged ( ASTM A 473 S41500
material), guarantee the reliability of the material, then machine shaping by CNC, improve the pelton buckets precision,
and shap wave, thus ensure the turbine hydraulic performance and
our factory have advanced test system, all parts have ultrasonic
testing, penetration testing, magnetic testing, radiographic
testing, dimension&profile checking by measuring arm, to
guarantee our turbine best quality.